Lush Banners TT-FO-02, Руководство пользователя

Страница: 8 / 8

Connection Method 1: TC-30-3W-R Connection Method 2: TC-30-X
First, press button to insert the cap into the extrusion. The button will snap in place. Repeat previous
step until all four sides of bottom and top are assembled.
First, connect curved spreader tubes (COL-T4) to side tubes (COL-T5). Continue connecting middle
section of tube to bottom frame section. Finish frame assembly by connecting top corners and
tubing. *Frame can be on side for assembly.
Connection Methods
Slide the COL-T3 into the COL-T6 until it snaps in place. Repeat this for all 4 bottom COL-T2
sections.
Connection Method 3: COL-01-T3/COL-01-T6 Connection Method 4: SNAP BUTTONS
Snap button connections are simple and easy to use. First, locate the snap button on the connector
or swage tube. Second, locate the hole on the corresponding tube. Press the snap button with your
thumb and slide the tube and connector together so that the snap button snaps fully into the hole.
To disassemble, press the snap button and carefully pull them apart.