Luraco iRobotics, Руководство пользователя, Страница: 4 / 12

4
iRobotics Installation Instruction
1. Determine the surface of the base that you want to install the iRobotics, ensure that the surface is flat.
2. Locate a position to drill the holes with the dimensions as shown in Fig.1.
3. Lift the “chair back” rests on the chair seat. Lock the “chair back” into actuator lock as shown in Fig 2.
4. Lift the seat base to see the four holes on the massage chair base.
5. Place the chair base to match the four drills made on the base.
6. Install the screws and nuts to secure the chair frame to the base. Use a Hex key wrench to tighten the four screws.
7. Plug the power cord into the Masterbox.
8. Place the pillow and plug the head-phone as shown in figure 4.
Figure 1. Drill Instruction
Figure 2. Lock Mechanism
Figure 3. Location of Headphone Jack
Release plate
for releasing
the lock
Spring loaded lock
3.5 mm
Stereo jack
29 cm
27.5 cm
M8 Screw, Drill
diameter 10 mm