background image

 

2

IMPORTANT SAFETY INSTRUCTIONS 

 

When using an electrical appliance, basic precautions should always be followed, including the following: 
Read all instructions before using (this appliance). 

 

WARNING

 – To reduce the risk of burns, fire, electric shock, or injury to persons: 

 

1.  The main power switch is marked with international symbols “O” and “I”. The switch in position “I” means that 

system is turned on, and the switch in position “O” means that system is off. 

2.  An appliance should never be left unattended when plugged in. Unplug from outlet when not in use and before 

putting on or taking off parts. 

3.  Close supervision is necessary when this appliance is used by, on, or near children, invalids, or disabled  
      persons.  Keep children away from extended foot support (or other similar parts). 
4.  Use this appliance only for its intended use as described in this manual. Do not use attachments not 

recommended by the manufacturer. 

5.  Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped 

or damaged, or dropped into water. Return the appliance to a service center for examination and repair. 

6.  Keep the cord away from heated surfaces. 
7.  Do not use outdoors. 
8.  Do not operate where aerosol (spray) products are being used or where oxygen is being administered. 
9.  To disconnect, turn all controls to the off position, then remove plug from outlet. 
10.  Connect this appliance to a properly grounded outlet only. See grounding instructions. 

11.  Do not remove the back cushion and do not play with roller mechanism. 
12.  Do not remove the bottom seat and do not play with actuators. 

13.  Keep the cord out of heavy traffic area. To avoid fire hazard NEVER put the cord under rugs or near heat 

generating devices. 

14. 

Always unplug the power cord from the electrical outlet immediately after use and before cleaning.

 

15.  Always check the volume before using the headphones. 
16.  Do not operate any equipment with damaged parts. 
17.  Any other use not recommended by the manufacturer may cause electrical shock or injury to persons. 
18.  Do not touch or re-wire the wires connected to the master-box.  
19.  Do not attempt to repair or adjust any electrical or mechanical functions on this unit. Doing so will void the 

warranty.  

 

After reading this owner’s guide, if you have any questions or comments, please call +1-817-633-1080 or  
contact our technical support department at [email protected]  or visit our website at www.luraco.com

 

for more information 

 

GROUNDING INSTRUCTIONS 

 

This product must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for 
electric current to flow, thus reducing the risk of electric shock. This product is equipped with a cord having an  
equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is 
properly grounded in accordance with all local codes and ordinances. 
 

DANGER

 - Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with  

a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify   
the plug provided with the product - if it does not fit the outlet; have a proper outlet installed by a qualified electrician. 
 

Followed by either instruction 1) or 2) below: 
 

1.  This product is for use on a nominal 120V circuit, and has a grounding plug that looks like the plug illustrated in sketch 

A in the Figure pictured. A temporary adapter that looks like the adapter illustrated in sketches B and C may  

be used to connect this plug to a 2-pole receptacle as shown in sketch B if a properly grounded outlet is not                      
available. The temporary adapter should be used only until a properly grounded outlet (sketch A) can be installed  
by a qualified electrician. The green colored rigid ear, lug, or the like extending from the adapter must be connected 
to a permanent ground such as a properly grounded outlet box cover. Whenever the adapter is used, it must be  
held in place by a metal screw. 

 

 
 

Содержание iROBOTICS 5



















Отзывы: