8
Figure 3-2
Options to adjust the camera angle of your LUPUSNIGHT
– LE 138Hd / 139HD
Step 5:
Connect the camera via a coaxial cable to your HDTV recorder and, then, connect the power
cable to your power source. The camera will now boot and your HDTV recorder will receive
an image from the camera.
4. OSD
– menu
It is possible change camera settings via the OSD menu. Factory-provided, the camera has the
optimal settings to ensure a best possible image. However, if you want to change some settings,
please proceed as follows.
To open the OSD menu, right click on the image while in single picture mode. In the
Menu click on “Pan / Tilt / Zoom.” The following Menu should appear:
Figure 3-6
OSD menu
Click on the arrow at the right edge of the menu. In the expanded menu, click on “Enter
menu
” button in the upper right corner. In the following menu, click on enter to open the
OSD menu.
