Lupus Electronics LUPUSEC-XT2, Руководство пользователя

Страница: 6 / 148

6
ENGLISH
Important safety information
Warning
The warranty claim will expire in case of damages resulting from
the non-observance of this manual.
We do not assume any liability for consequential damages.
We do not assume any liability for damages to persons and/or
material whatsoever, which result from improper handling or
noncompliance with the safety instructions. The warranty claim
will expire in such cases!
This wireless alarm system is equipped with a high-quality housing. However, please
observe the following safety regulations:

Never open the control unit housing! This is dangerous and your warranty will
expire immediately.

Connect this product only to the approved voltage according to this manual.
Operate the alarm system only with the provided power supply unit.

The socket must be located in an easily accessible, moisture-proof indoor location.

Handle the alarm system with care, heavy vibration or bumps may damage this
alarm system.

Do not expose the alarm system to direct sunlight or strong heat, e.g. heaters.

To prevent overheating, install the control unit only in the shade and not close to
any heat source, e.g. heater!

Provide for sufficient ventilation of the system. Keep a minimum safety distance of
20 cm (8 inch) on all sides.

Do not install the alarm system close to strong electric power lines or magnetic
fields, as this may impair the transmission quality significantly.

Do not install the alarm system directly on iron or aluminium surfaces without
isolating the foot of the alarm system from the floor, as this may impair the
wireless transmission significantly.

Do not install the alarm system in moist, very cold or very hot environments.
Please observe the maximum humidity and temperature limits.

Persons (including children) with limited physical, sensory, or mental abilities
and/or lacking experience and/or knowledge must not use this product.

Keep children away from the product and other connected electric appliances at all
times. The alarm system includes cables, which may strangle children, and small
parts, which they may swallow. Lay cables expertly so that they are neither bent
nor otherwise damaged. Assemble the alarm system out of children’s reach. Do
not leave packaging materials unattended, they may be dangerous for playing
children.

Use a damp cloth to clean the
alarm system’s surface. Afterwards, dry the surface.
Cleaning agents will damage the surface.