Lupo SUPERPANEL DUAL COLOR 30, Руководство пользователя

Страница: 5 / 8

DMX OPERATION - Advanced Settings
LIGHT MODES
1. Press the « OK »
2
button to enter the main MENU.
2. Navigate through the main MENU with the « »
1
or « »
3
buttons to the DMX item,
select by pressing the « OK »
2
button.
3. Press the « »
1
or « »
3
buttons to select DMX ADVANCED, press « OK »
2
button to
confirm selection.
4. Select one of the options between the DMX BIT and DMX SIGNAL LOSS, press « OK »
2
to
confirm the selection.
DMX BIT:
Resolution of the DMX control. 8bit 1 channel per function and 16 bit 2 channels per
function.
1. Select the
DMX BIT item by pressing the « OK »
2
button.
2. Use the « »
1
or « »
3
buttons to choose between 8bit / 16bit , press the « OK »
2
button to confirm the selected setting. See DMX PROTOCOL MANUAL .
DMX SIGNAL LOSS:
T his feature allows to choose the device’s behaviour in case of a DMX signal loss.
1. Select the LOSS DMX SIGNAL item with the « OK »
2
button.
2. Use the « »
1
or « »
3
buttons to select the device’s behaviour between BLACK
OUT /SETTINGS LAST / SETTINGS 1min , press the « OK »
2
button to confirm the
setting.
Black out: The device switches off.
Settings Last: The values of the last selected setting are maintained over time until the
device is switched off.
Settings 1min: The values of the last selected settings will be maintained for one minute
and then the device will switch off.
A. CCT MODE: Warm and cold white control mode. It allows you to adjust colour temperature
(CCT), green/magenta compensation (GN) and light intensity. This is the default setting.
B. HSI MODE: Colour composition mode. It allows you to adjust hue of colour (HUE), colour
saturation (SAT) and light intensity.
C. RGBW MODE: RGBW colour control mode allows to individually set the R, G, B, W, Color
Temperature (CT), green/magenta compensation (GN) values and to adjust light intensity
D. FRGBW MODE: Available only in DMX operation. Same as RGBW but with white color
power unlimited. See DMX PROTOCOL MANUAL .
MODE
CCT
RGBW
HSI
PRESET
EFFECT
CCT/HUE
5
CT 2800K to 10000K
-
HUE 0º to 100º
-
"See EFFECT table"
GN/SAT/COLOR
6
« »
1
« »
3
GN -1.00 to +1.00 -
Select function R/G/B/W/CT/GN Change values of the function
SAT 0 to 100% -
-
"See EFFECT table"
Change Preset
Change Effect
INTENSITY
4
Light Intensity
from 0 to 100%