WARNING:
When hanging the fixture from higher position, please make sure you use a safety cable to
attach the barndoors to the yoke of the fresnel.
Barndoors should always be secured to the yoke when used in this way.
Another safety cable should be used to secure the fixture to the mounting pipe or truss.
Both safety cables must be properly dimensioned for the fixture and the application when
the fixture is operated in hanging position please ensure that the accessories are installed
correctly with top latch locked.
SAFETY PRECAUTIONS:
Do not operate the equipment before studying the
instruction manual and the accompanying safety
precautions. Make sure that Lupo Safety Instruction
is always included with the equipment! Lupo products
are intended for professional use. Do not place
or use the equipment where it can be exposed to
moisture, extreme electromagnetic fields or in areas
with flammable gases or dust! Do not expose the
equipment to dripping or splashing. Do not place any
objects filled with liquids on or near the equipment.
Do not expose the equipment to hasty temperature
changes in humid conditions as this could lead to
condensation water in the unit. Equipment must only
be serviced, modified or repaired by authorized and
competent service personnel!
CAUTION - BURN HAZARD - HOT PARTS
Do not touch hot parts with bare fingers! LED bulbs
and certain metal parts emit strong heat when used!
Do not point lamps too close to persons. Always use
the fixtures with the front part closed.
NOTICE - EQUIPMENT OVERHEATING RISK
Do not obstruct ventilation by placing filters, diffusing
materials, etc. over inlets and outlets of the equipment
ventilation or directly over glass cover or LED bulbs.
FINAL DISPOSAL
When no longer in use, this product may not be
deposited in the normal household waste but should
be brought to a collection point for the recycling of
electrical and electronic appliances. The materials
are recyclable as marked. By re-use, recycling or
another form of usign old appliances you are making
an important contribution towards the protection of
the environment. Please ask your local authorities for
the appropriate disposal point. Equipment contains
electrical and electronic components that could be
harmful to the environment.
Equipment may be returned to Lupo distributors free
of charge for recycling according to WEEE.
Follow local legal requirements for separate disposal
of waste, for instance WEEE directive for electrical
and electronic equipment on the European market,
when product life has ended!
MAINTENANCE AND CARE
Please do not forget that the safe operation of
lampheads also includes their maintenance and care.
A visual inspection should be conducted before every
use and an inspection of electrical safety should be
conducted at least once every 12 months.
WARRANTY
Each Lupo product will be repaired free of charge by
Lupo if during a period of
12 months
for mechanical
components and
12 months
for electrical/electronic
components from date of purchase its working order
is impaired through a manufacturing or material
defect. The faulty product should be immediately
sent to authorized dealer or Lupo. This warranty is not
valid for equipment which has been used improperly,
dismantled, modified or repaired by persons not
belonging to the Lupo distribution network. It does not
cover lamps, lenses or the material entirely or partially
made of glass. No responsibilities can be accepted
for damage resulting from unsatisfactory operation of
the equipment. Please contact the dealer who sold the
fixture/s before any units are returned for repair. Lupo
will make the final determination as to whether or
not the unit is covered by warranty. Lupo will replace
or repair to proper working condition any products
that are returned under waranty. Products repaired or
replaced under warranty are under warranty only for
the remaining unexpired period of time of the original
warranty. Any product unit or part returned to Lupo
must be packaged in a suitable manner to ensure the
protection of such product unit or parts. The package
must be clearly an prominently marked to indicate
that the package contains returned product units or
parts. All returned product units or parts must be
accompanied by a written explanation of the alleged
problem or malfunction.
Thanks for having purchased
Lupo
products. All the products are made in Italy and all the efforts
have been put to keep the quality standards high. We hope this product can help you in your job and
make your life easier as a professional. We also hope you will enjoy its use and we would be happy to
receive your feedback about it.
Release 5.xx
