Lupine Wilma TL, Руководство пользователя, Страница: 5 / 11

8 Wilma TL 9 Wilma TL
Programming
4 4
You may easily select the Wilma's light levels. By default, the Wilma TL operates in the 2-step low
mode with stealth off, low start off, and double click off. Several other light programs are available.
They are very easy to select by simply keeping the button depressed until the button's red LED
(blue LED) flashes once, twice, etc. When taking your finger off the button accordingly, the setting
will be saved.
The lamp's electric power consumption amounts to (approximate values):
Light levels:
The “Power Control System“ provides the possibility for individual programming. By default, the
Wilma TL is set so that usually no changes are necessary.
3 % dimming 0.5 W 50 lumen
15 % dimming 2.5 W 230 lumen
30 % dimming 5 W 440 lumen
55 % dimming 9 W 650 lumen
100 % 17 W 1100 lumen
Default setting

2-step low mode (2 step low) 17 W + 0.5 W

2-step high mode (2 step high) 17 W + 2.5 W

2-step mode with disorientation flash (2 step Flash) 17 W + Flash (15 Hz )

3-step mode with SOS (3 step SOS) 17 W + 2.5 W + SOS
 4-step mode (4 step) 17 W + 9 W + 5 W + 0.5 W
 1-step mode (1 step) 17 W
 3-step mode with RVLR (3 step RVLR) 17 W + 2.5 W + RVLR (3.7 Hz)

Stealth mode on (stealth on)

Stealth mode off (stealth off)

Low start on (low start on)
 Low start off (low start off)
 Double click on (dbl click on)
 Double click off (dbl click off)
In stealth mode, initialization, voltage display, and battery warning usually indicated by
the button's LEDs are partly deactivated. Of course “stealth on“ does not mean that our
Wilma TL will no longer give light or will even become invisible, however, LED indications
will be reduced to a minimum.
This mode includes an additional slow flash mode.
This mode is extremely irritating and may by no means be misused.
This setting enables numerous variations as the lamp will not start at maximum
power as by default, but at the lowest stage.
Exception: The SOS program and the RVLR program.
If this function is activated, the lamp may only be switched on with a quick double
click. Useful for anybody who wants to avoid that the lamp is switched on acciden-
tally in particular during transport (e. g. in a backpack).
Note: The SOS sign is an emergency signal! Use it carefully and only in case of a real
emergency. Due to the lamp's high light output, this signal is visible for several miles;
the operating time is several hours.
Misuse may be prosecuted!
 Considering all possible combinations, 56 different setting options are provided.
 Refer to Programming scheme on p. 10/11
Stealth mode (stealth on):
Low start (low start on):
Double click (dbl click on):
Disorientation Flash:
RVLR: