24 Piko R
For establishing a connection, the receiving mode in the lamp has to be activated.
Keep the lamp’s button depressed the switch turns up
green
(after 15 sec) and let the button go.
The receiving mode is active for 30 seconds. During this time, press the remote control’s button
until the remote does light up
green
,
too.
release the button.
Several lamps and one transmitter:
It is possible to connect up to five lampheads to a single remote switch.
Several transmitters and one lamp:
Up to 4 transmitters may be connected to one lamp. The transmitter are stored in the lamp in turn.
If you want to use only one transmitter again to control your lamp, it might be necessary to connect
this transmitter up to 4 times with the lamp.
Bluetooth Remote
By default, your lamp has already been connected to the transmitter.
Connecting the transmitter to the light:
The Bluetooth Remote comes together with the Peppi V5 barmount (helmet & bikelights) or a bracelet
(Headlamps). On the bike, the best way to mount the remote is directly next to your grips so you have
full control an don't need to take off your hands while riding. The bracelet can be attached to a lot of
other things like ski poles, too.