Special functions
There are two ways to activate the special functions:
1) The lamp is turned off:
Keep the respective button pressed for about 2 sec.
2) The light is on:
- The lamp lights with a white light setting. Keep the button for the
red LEDs pressed for about 2 sec. to activate the red special functions.
- The lamp lights with a red light setting. Keep the button for the
white LEDs pressed for about 2 sec. to activate the white special functions.
0.05 W
Diffuse low
0.5 W
Diffuse middle
1 W
Diffuse high
1.2 W
SOS
2 W
Flash
0.05 W
Diffuse
0.4 W
Diffuse
2 W
Flash
Special functions red LEDs
Special functions white LEDs
Operation
Battery and Charging
Capacity indicator:
Shortly press both buttons at the same time. The four small LEDs will show
the capacity in 25% steps.
Charge:
While charging, the red LEDs turns on and will turn off, as soon as the lamp is
fully charged. While charging you can still use the capacity indicator.
Note: When key lock is activated, there‘s no charging indicator through the
red LEDs.
If you intend not to use the lamp for a longer period of time, fully charge and
store it at a cold and dry place. If stored for more than 3 months, recharging
is recommanded.
The Penta can also be charged with the USB One Art.No. i444 from an exter-
nal Lupine battery. It can also be operated at 3W while charging. You can‘t
use the Boost mode while charging.
Battery:
Charge & Light:
Boost Mode
In this mode either the white or the red LEDs are lighting in full power for
20 Sec. Regardless which light setting is activated, you can turn on this
mode by pushing the relevant button twice (doubleclick). Afterwards the
light automatically switches back to your former light setting. Note: With
less 30% battery capacity, there is no boost mode available anymore.
25-50%
0-25%
50-75%
75-100%
= 25-50%
Remaining
capacity
Example:
Содержание PENTA
Страница 1: ......
