C
H A R G E R
O
N E
2
General ( V 41 ) :
The Charger One was developed for use with Lupine high current Li-Ion rechargeable batteries,
but it is also fully compatible with all other Ni-MH Lupine rechargeables).
Out of the box, the Charger One is set to charge the specific battery type the lighting system is
supplied with. Although the Charger One can easily be set to your individual settings, it is
not
necessary
. Please do not attempt to program the charger until you are used to operating the
Charger One and you have read and understood this Technical Information.
All pictures shown below demonstrate the charging of a Li-Ion rechargeable. For
NiMH batteries ensure the display reads "NiMH" instead of Li-Ion when charging
these battery types.
In the instructions below, "
battery type
" is used to represent the actual type of
battery (Li-ion, NiMH ).
Components:
The charging system "Charger One" consists of two components:
-
AC/DC adaptor
-
Charger One with microprocessor controlled charger
The AC/DC adaptor accepts 100V~ – 264V~ from the mains and deliveres 12V= / 2A to the
charger.
Connection:
Plug the AC/DC adaptor into the mains. Plug the adaptor into the socket of the Charger One.
After a short initialisation the display will show: "
battery type
ready for charge".
The Charger One is set to default to the charge the type of battery the lighting system is
supplied with. By
pressing
the select button you can toggle between the various charging
programs (see chapter "Programming the Charger One"). The Charger will always start with
the program that was last selected before the charger was removed from the power supply.
Charging:
The Charger One is now ready to charge. Just plug your rechargeable battery to the Charger
One and charging starts automatically. The first line of the display shows: "
battery type
charge".
(Remember:
battery type
stands for the respective type of the rechargeable battery!)
