3
IE/EN
User manual:
A -
Adjusting the back system on the carrier:
1. First loosen all the straps of the carrier system, then put the carrier on (Figure 1)
2. The shoulder strap attachment should be positioned centrally between the shoulder blades. If this is not the
case, adjust the height of the shoulder straps (S, M, L, XL). Figure 2
3. To do this, open the Velcro fastener on the carrier system (Figure 3 & 4)
4. Adjust the fastener to the desired position e.g., size M: Bring the Velcro fastener above the mark M.
Pull the fastener up to the top and lock it.
5. The size of the carrier system is fixed by locking the Velcro fastener.
6. The waist belt should be positioned centrally on the hip bone (Figure 5)
7. Close the waist belt and pull it firmly (Figure 5)
8. Tighten the load control belts (the belt on the shoulder straps) to improve the contact between the back carrier
and your back. Figure 6
9. Tighten the shoulder straps (weight distribution on shoulders and waist belt) (Figure 7)
10. Close the chest strap (Figure 8)
B -
Putting on and setting down the carrier: The child has be fully strapped in when putting on or setting down the
carrier.
1. Put the carrier on carefully
2. Check the adjustments made in Part A. Most of the weight should be on your hips. The shoulders should not be
loaded too much.
3. Re-adjust the carrier system if necessary.
4. Fold the stand after putting on the back carrier.
