Lunt Solar Systems 2520 N. Coyote Dr. #111 Tucson, AZ 85745 (520) 344-7348
5
Handling and Equipment Care
Handling
A Lunt Solar Systems solar filter or telescope houses many optical elements that are all pre-aligned and fixed at the factory. There are no
user serviceable parts inside the scope. The telescope or filter should NEVER be taken apart. This will not only void your warranty leading
to costly repairs, it can only serve to further damage the instrument and compromise its safety.
Most Lunt Solar Systems filters and telescopes house a delicate optical element referred to as an Etalon. These etalons are
suspended in the filter housing in an effort to both protect it and isolate it from outside influences, which could de-tune the etalon
filter. Extensive research has been done to assure the best performance of what is essentially the "heart" of the system while
protecting it from the day-to-day bumps, jarring, and vibrations of normal use.
The instrument should NEVER be subjected to shock due to being dropped. Mishandling of the filters system will cause the
etalon to de-contact (not covered under warranty) and will render the instrument nonfunctional until repaired.
The instrument should be stored in its original case. As with any precision optical instrument it should be kept in as low a
humidity area as possible.
With proper handling and care the filter should last a lifetime.
Equipment Care
As with most telescopes and optical equipment there can be a buildup of dust and debris on the lens and exterior components after sitting
out all day. Here are some guidelines for the care of your new Lunt Solar Systems Telescope:
Blow off loose dust and dirt using a clean dry air source at low volume. Do NOT use shop compressed air, which contains oil and
will further contaminate the instrument.
Stubborn particulates can be brushed from the surface with a static free lens brush. Use gentle sweeping motions.
Fingerprints and smudges can be removed using lens tissue or a Kleenex type tissue product. Fold the tissue or cloth to make a
"pad", apply a cleaning product to the end of the pad dampening it evenly (do not apply solution to the lens), wipe in circular
motion starting at the center and working around the edge and off in one complete motion. Be firm, but do NOT rub. Blow lightly
once the lens is clean to help remove residual solution. Residual dust from the cloth can be blown off.
Do NOT use Acetone or strong degreaser type products, household cleaning agents, paper towels, tissues with added scent or
color (plain tissues only), or bleach or acidic products which will damage the anodized surfaces.
If ever in doubt, consult your local dealer or call Lunt Solar Systems at 877-344-7348 with any questions or concerns. We are happy to
assist you!
