Page 1 of 5
Installation Instructions
I - Sheet Number
LUNDRB25
Rev.A
Important Safety Information
NOTE: Actual product may vary from illustration.
Contents
Latitude Nerf Bar for F-150 Super Crew
For proper installation and best possible fit, please read all instructions BEFORE you begin.
For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-241-7219.
• To be used with Lund® branded products only.
• Do not stand on Lund running board or bracket while vehicle is in motion.
• Do not use the brackets as a jacking point for the vehicle.
• Do not use the bracket system or running boards to fasten cargo.
• Periodically check all components for tightness.
• Be sure to wear safety glasses while installing brackets.
•When using power tools, read and understand all operating instructions.
Tools Required
Preparation Before Installation
• Park your vehicle in a clean, level location. Check to make sure the vehicle is in park, or for manual drive models, place the
transmission in first gear. Engage the parking brake. Chock wheels.
• Unpack the kit and identify the parts according to the content descriptions.
• An assistant is recommended to help position the running board properly during the installation.
Socket Set
Wheel Chocks
Safety Glasses
Ratchet and Extension
Lund Part# 26510016
26610016
Passenger Side Nerf Bar
Driver Front Bracket
Passenger Front Bracket
Passenger Mid Bracket
Passenger Rear Bracket
Driver Rear Bracket
Driver Mid Bracket
12mm Single Bolt
Plate (2)
12mm Double Bolt
Plate (2)
12mm Plastic
Retainers (6)
8mm x 30 mm
hex bolt (16)
8mm x 25 mm
hex bolt (12)
8mm x 24mm
OD x 2mm Flat
Washer (36)
8mm Lock
Washer (28)
8mm Hex Nut
(8)
12mm flat
washer (6)
12mm lock
washer (6)
12mm hex nuts
(6)
8mm clip nuts
(8)
Driver Side Nerf Bar
