Installation Instructions
OE Style No Drill Bracket
For proper installation and best possible fit, please read all instructions BEFORE you begin.
For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-241-7219.
WARNING
• To be used with Lund® branded products only.
• Do not stand on Lund running board or bracket while vehicle is in motion.
• Do not exceed 350 lbs. weight on the Lund bracket system.
• Do not use the brackets as a jacking point for the vehicle.
• Do not use the bracket system or running boards to fasten cargo.
• Periodically check all components for tightness.
CAUTION
• Be sure to wear safety glasses while installing brackets.
• When using power tools, read and understand all operating instructions.
3. Unpack the bracket kit and identify the parts according to the content descriptions above.
Important Safety Information
X6
Flange Nut (M8-1.25)
X12
Safety Glasses
10422
Rev B
Contents
Tools Required
Preparation Before Installation
13mm Socket
1. Park your vehicle in a clean, level location. Check to make sure the vehicle is in park, or for
manual drive models, place the transmission in first gear. Engage the parking brake.
2. Chock one wheel on both sides with wheel chocks.
Wheel Chocks
Bracket (M-1171)
Ratchet
PAGE
1
OF
12
Kit #310061
