Page 1 of 3
Installation Instructions
I - Sheet Number
LUNDRB30
Rev.A
Important Safety Information
NOTE: Actual product may vary from illustration.
Contents
Rock Rail Running Boards for Jeep Wrangler
For proper installation and best possible fit, please read all instructions BEFORE you begin.
For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-241-7219.
• To be used with Lund® branded products only.
• Do not stand on Lund running board or bracket while vehicle is in motion.
• Do not use the brackets as a jacking point for the vehicle.
• Do not use the bracket system or running boards to fasten cargo.
• Periodically check all components for tightness.
• Be sure to wear safety glasses while installing brackets.
•When using power tools, read and understand all operating instructions.
Tools Required
Preparation Before Installation
• Park your vehicle in a clean, level location. Check to make sure the vehicle is in park, or for manual drive models, place the
transmission in first gear. Engage the parking brake. Chock wheels.
• Unpack the kit and identify the parts according to the content descriptions.
• An assistant is recommended to help position the running board properly during the installation.
Socket Set
Wheel Chocks
Safety Glasses
Ratchet and Extension
Lund Part# 26410026
Passenger Side Running
Board
Driver Side Running
Board
