4. Dimensions
Installation
The devicd is supplied by the DALI-signal line. The current consumption depends on the number
of connected DALI ballasts. The own consumption is 2mA.
If more dimmers shoudl be connected to the output the number of led power supplies can be
increased easily with the help of DALI Repeater PS, DALI Expander or DALI Expander 3.
Function
The DALI DT8 to DT6 converter represents one control gear on the DALI-line (DT8, Mode Tc).
Commands for diming and colour temperature adaption are converted in dimlevels for a cold
white and a warm white channel. Depending on the output mode the dimlevels are sent either
broadcast on two separate outputs (Out1: cold; Out2: warm, factory default) or on both outputs
to group G0 (cold) and G1 (warm).
The output mode (DT8 to DT6 Trnsmit Mode) can be set easily in the DALI-Cockpit in the tab
„Extensions“.
5. Instruction
