Lunar DPX-IQ, Руководство оператора, Страница: 70 / 166

B-2 Femur DPX-IQ Operator’s Manual
5. Examine the other scan values and select
/
to go back to the Femur Acquisition
screen.
6. Select
!
. The scan arm moves to the HOME position.
7. Position the patient on the scan table (figure B-1):
➊
Palms are flat on the scan pad next to the body, or both hands placed on the
upper chest.
➋
The patient’s body is in the center of the scan pad as shown by the centerline.
➌
The patient's head is approximately 2.5 cm (1 inch) below the horizontal line on
the scan pad.
Figure B-1. Patient position
8. The DPX-IQ unit includes one of the two foot braces shown in figures B-2 and B-3.
Follow the instructions for your model’s brace. (If your unit has both foot braces, use
the brace shown in figure B-3.)
• If you have the brace shown in figure B-2, place the foot brace so the vertical
part is about 3 centimeters away from the center line. The patient’s hips and
shoulders should be centered on the center line with the pelvis square on the
table. The angled side of the brace should be toward the leg to be scanned.
Figure B-2. Foot brace position for brace with vertical side
➊
➋
➌