Lunar Caravans, Руководство пользователя

Страница: 17 / 120

17
PREPARING FOR THE ROAD
SECONDARY BRAKING CABLE
(Break away device)
Purpose - To apply a trailer’s brakes if it
becomes separated from its towing vehicle.
Having done this, the cable assembly is
designed to part, allowing the trailer to come
to a halt away from the towing vehicle.
Construction - A thin steel cable, possibly
plastic coated, and fitted with a means of
attachment for connection to the towing
vehicle.
Operation - In the event of the main coupling
of the trailer separating from the towing
vehicle, the cable should be able to pull tight,
without any hindrance, engaging the trailer’s
brakes.
NOTE: The breakaway cable should never
become taut during normal use.
Correct procedure for use:
O
Regularly check the cable and clip for
damage. If in doubt, contact your dealer
or service agent.
O
Make sure the cable runs as straight as
possible and goes through a cable guide
underneath the trailer coupling.
O
Determine whether or not the towbar has
a designated attachment point (i.e. a part
specifically designated by its
manufacturer for a breakaway cable).
Where a designated attachment point is
provided on the towbar:
Either:
a) Pass the cable through the attachment
point and clip it back on itself (Fig 1).
Or:
Where no designated attachment point
has been provided on the towbar:
Fixed ball - Loop the cable around the neck
of the towball. If you fit the cable like this, use
a single loop only. (See Figs. 2 and 3).
Detachable ball - You must seek guidance
on procedure from the towbar manufacturer
or supplier.
Fig 1
Fig 2
Fig 3