Lunar Caravans ALARIA 2018, Руководство пользователя

Страница: 36 / 146

ON THE ROAD
36
E x t r a E x t r a E x t r a E x t r a E x t r a functions
Calibration (setting the zero point)
The calibration procedure described below has already been carried out at your dealer/installer.
You don’t have to perform this procedure by yourself. E&P Hydraulics has decided to include this chapter as an extra in this manual in case of failure and/
or service & repair matters.
Consider setting the zero point** as a condition to make it possible to level the caravan automatically and/or manually. When this operation, for some
reason, has not been done or has been carried out incorrectly, it is not possible to level the caravan.
**The zero point is the point (level) at which the hydraulic levelling system (in an automatic cycle) returns.
ON/OFF
(no.5)
RETRACT ALL
JACKS (no.8)
4
Retracting the jacks
Follow the procedure below to retract the axle and
corner supports.
Step 1 Press 1x on the button “ON/OFF”
(no.5) to switch the levelsystem
ON.
The “E&P-logo” LED lights up,
indicating that the levelsystem is
switched on.
Step 2 Press 1x on the button “RETRACT
ALL JACKS” (no.8) once.
The indicator LED “JACKS NOT
FULLY RETRACTED” (no.4) goes
out when all jacks have been fully retracted.
Step 3 Press 1x on the button “ON/OFF” (no.5) to switch the levelsystem OFF.
IMPORTANT: Before departure ensure all supports have been retracted.