Luna BDC 300, Руководство пользователя

Страница: 17 / 40

15
Fig. 7
The dust collector is now ready to be placed into service. Before
connecting to a power source, be sure the power source is proper-
ly grounded and is of proper voltage and amperage.
SAFETY RULES
1. Read and become familiar with the entire operating manual.
2. Keep guards and cover in place and in working order.
3. Wear eye protection at all times. Use safety glasses with side
shields or safety goggles, meeting the national safety stan-
dards, while operating this machine.
4. Keep work area clean and well lighted. Clutter and inadequa-
te lighting invite potential hazards.
16. Do not use dust collector for anything except wood dust.
Material such as liquids, metal shavings, metal dust, screw,
glass, plastic or rock can cause sparks when coming into con-
tact with any part of the collection system.
17. Do not place your hands, lumber or tools near inlet opening
while machine is running or connected to power.
18. Always wear a respirator and safety glasses when removing,
emptying or replacing collection bags. Secure bags tightly to
dust collector to avoid bags from “blowing off”.
. This machine is for dust from wood working machines only.
20. Machine cannot be used outside.
5. Ground all tools. If a machine is equipped with a three-prong
plug, it must be plugged into a three-hole electrical outlet or
grounded extension cord. If using an adapter to aid in accom-
modating a two hole receptacle, ground using a screw to a
known ground.
6. Avoid dangerous environments. Do not operate this machine
in wet or flame environments. Airborne dust particles could
cause an explosion and severe fire hazard.
7. Make sure switch is in the “OFF” position before connecting
power to machine.
8. Keep children and visitors away. All visitors should be kept a
safe distance away while operating unit.
9. Childproof workshop with padlocks, master switch or by
removing starter keys.
10. Disconnect machine when cleaning, adjusting or servicing.
11. Do not force tool. The machine will do a safer and better job
at the rate for which it was designed.
12. Use correct tool. Do not force machine or attachment to do a
job for which it was not designed.
13. Wear proper apparel. Do not wear loose clothing, neck ties,
gloves, jewelry, etc.
14. Remove adjusting keys and wrenches. Before turning the
machine on, make it a habit to check that all adjusting keys
and wrenches have been removed.
15. Do not leave machine unattended. Wait until it comes to a
complete stop before leaving the area.
19
Safety
Fire hazards
Warning! Danger of fire! .L1.l Incorrect installation and usage
could result in a fire.
• The dust extraction hoses must be electrically
conduc tive and
grounded to prevent electrastatic build up.
• The vacuum hoses/pipes must be flameproof.
• Earth vacuum hose/pipes against any static electricity that may
accumulate.
• All electrical connections must be installed correctly by a
qualified person.
• Electricity suppiy only in authorized field of ± 10% of network.
• Only vacuum sawdust and woodshavings.
• Da not vacuum spark•generating objects (e.g. nails, screws etc.).
• Do not vacuum any inflammable waste. (e.g. cigarette ends,
flying sparks, etc.)
Procedure in case of fire
1. Pull out the mains plug.
2. Stop the pneumatic supply.
3. Call the fire•brigade.
Attention! When moving the chip container, flash fire can occur!
Fig. 14: Procedure in case of fire
Fig 14