Luna 20006-0200, Оригинальное руководство пользователя

Страница: 28 / 84

28 29
1 - Upper wheel
2 - Upper guide lifting handwheel
3 - Upper guide
4 - Rip fence assembly
5 - Table
6 - Dust port
7 - Lower wheel
8 - Lower door
9 - Switch with electric brake
10 - Upper door
3.2 Technical specification
Motor Voltage 400 V ±5%/50HZ
Current 7A
Motor power output 3kW
Blade length mm 4470
Blade width mm 10-35
Max. cut depth mm 370
Throat width mm 580
Blade speed m/min 1500
Table size mm 700x608
Table tilt 0 - 20
Dust port diameter mm 100
3.3 Electrical connection
- Electrical installation should be carried out by com-
petent, qualified personnel.
- The mains connection should be made using the ter-
minal box.
- Replacement of the power supply cable should only
be done by a qualified electrician.
Warning: To avoid electrocution or fire, any main-
tenance or repair to electrical system should be done
only by qualified electricians using genuine replace-
ment parts.
3.4 Noise level
No load Load
Sound Pressure Level ........< 80dB(A) < 90dB(A)
Sound Power Level ............< 90dB(A) < 100dB(A)
The noise levels measured are emission levels and
not necessarily the safe working level. Although
there is a correlation between the emission levels
and the exposure levels, this cannot be used reliably
to determinewhether or not further precautions are
required. The factors which affect the actual level of
operator exposure include the duration of exposure, the
ambient characteristics and other sources of emission,
for example, the number of machines and other adja-
cent machining. The permitted exposure values may
also vary from country to country. Nevertheless, this
information allows the user of the machine to better
evaluate the dangers and risks.
Other factors which reduce exposure to noise are:
- correct tool choice
- tool and machine maintenance
- use of hearing protection systems (e.g. headsets,
earplugs,...)
Warning: Please use the hearing protection systems if
the above mentioned noise levels exceed 95dB(A).
3.5 Dust extraction
If this band saw is operated indoors it is recommended
to have it connected to a dust collector. The suction
connector, supplied with the machine, has to be fitted
to the dust ejection port of the saw for this purpose.
The diameter of the suction connector is 100mm (4”).
- Workmen working in operations processing oak or
beech timber where found to develop more often can-
cer of the mucous membrane of the nose (adenocar-
ciome of the inner nose) then other workers.
- Experience shows that skin contact with oak or beech
dust does not cause cancer.
Warning: Wood dust and chips, together with an igni-
tion source and the oxygen in the ambient air, can
cause fires and explosions, injuries and allergies.
4. Installation and operation
4.1 Installation zone characteristics
Warning: It is prohibited to install the machine in
explosive environments.
The installation zone must be selected evaluating the
work space required depending on the dimension of
the pieces to be machined,and taking into account that
a free space of at least 800 mm must be left around the
machine.It is also necessary to check The floor capa-
city and its surface, so that the machine base is evenly
resting on its four supports.A power outlet and a chip-
suction system connection shall be closeto the selected
machine setting and it must be conveniently lighted.
4.2 Lifting
The machine can be lifted using a fork-lift truck, pla-
cing the forks under the feet or by using a “SLING”, as
shown, with a lifting capability of 2000 Kg.