110
110
55
110
212
WALL MOUNTING BRACKET
LUMINAIRE BODY
SET SCREW
PROVIDED
TO THE WALL
PLASTIC ANCHOR
NYLON WASHER
#12 X 1
screw
!
LUMINAIRE BODY
SET SCREWS
PROVIDED
CONCRETE
WALL
we brighten up your life
LUMZ PTE LTD
INSTALLATION MANUAL
ZARA
Factory:
No.14, Jalan Anggerik Mokara 31/44, Kota Kemuning Seksyen 31,
40460 Shah Alam, Selangor, Malaysia.
Tel: (00603) 5121 1887
Fax: (00603) 5121 5187
Email: [email protected]
o
o
o
o
o
o
o
Housing made of aluminium
Impact resistance tempered glass lens
Mounting bracket with 2 fixing holes
Operating temperature: -20°C~+40°C.
LED lifetime up to 50,000 hours
Voltage range: 100 - 240 VAC ~ 50 /60 Hz
Wattage: 4.5 W & 9 W
PRODUCT DESCRIPTION & DIMENSION
IP 65 IK 08 CLASS I WITH INTERGRAL DRIVER
WARNING
!
MAKE SURE POWER IS DISCONNECTED UNTIL INSTALLATION OF PRODUCT IS COMPLETELY FINISHED.
FAILURE TO DO SO COULD RESULT IN ELECTRICAL SHOCK CAUSING SERIOUS INJURY OR DEATH.
WL-23A-J-W4-30-xx
WL-23A-J-W4-40-xx
DESCRIPTION
MODEL:
Connect wires from the luminaire to AC power as follows:
1. Connect BLUE / BLACK wire to the NEUTRAL wire.
2. Connect GREEN / YELLOW-GREEN wire to the GROUND or EARTH wire.
3. Connect BROWN / RED wire to the LIVE wire.
INSTALLATION
Connect all wires from the luminaire to AC power using a connector.
Make sure all wiring connections are tight so that no bare wires are visible.
Good connections may avoid tripping from happening.
ACCESSORIES MOUNTING (OPTIONAL)
!
WIRING INSTALLATION
Singapore Office (HQ Sales & Marketing):
1 Coleman Street #10-06, The Adelphi,
179803, Singapore.
Tel: (0065) 9758 2771
www.lumzlighting.com
ZARA/INSTALLATION MANUAL/REV.0
1/2
WL-24A-J-W9-30-xx
WL-24A-J-W9-40-xx
ZARA.D
ZARA.UDL
Note: Luminaire comes with:
1. 1pc of Hex Key
2. 2 pcs of Nylon Washer
ZARA.D
Fix luminaire body back to wall
mounting bracket with set
screws provided.
Make sure all screws fix tightly.
Connect wires with connector.
# Make sure power is disconnected
before installation
# Recommended screw: #12 X 1 screw
Using Hex Key provided,
remove all four set screws from luminaire
body to separate wall mounting bracket
for installation.
Pierce the rubber
grommet
Lead power supply
cables through the
hole of the grommet.
