EN
2.
Remove the filter cover (Guard) and remove the two filter inserts (Fig. 11)
3.
Clean or replace the air filters.
4.
Install the new or cleaned air filters in reverse order.
5.
Fasten the tripod mount with the hexagon socket screws (15 Nm).
Maintenance and care
Balloon envelope
•
Replace damaged envelopes immediately. If you find small hole(s) (3cm) these
can be repaired by using repair patches to cover the hole(s)
•
Clean the balloon mainly focus on the air filters and envelope, never use
abrasive cleaners, alkaline or solvent-containing cleaning agents, sharp or
abrasive aids.
Air filter
•
Clean the device’s air filters regularly, we recommend 4 weeks or immediately
after use especially in dusty environments.
•
Replace damaged or dirty filters.
Abb. 11
03/2020
19
EN
