2000-T-INS-LAB-RevC14
8
ATTACHING THE LEAD WIRES
WARNING: Ensure the device is OFF before connecting the lead wires.
WARNING: Never insert the lead wire plug into an AC power supply
socket. Personal injury and/or damage to the TENS unit could occur.
s
CAUTION: Use care when you plug and unplug the wires. Pulling on the
lead wire instead of its insulated connector may cause wire breakage.
The lead wires provided with the TENS device insert into the ports located
on top of the unit. Holding the insulated portion of the connector, push the
plug end of the wire into one of the ports; one or two sets of the wires may
be used. After connecting the wires to the stimulator, attach each wire to an
electrode.
Lead wires provided with the TENS device are compliant with mandatory
compliance standards set forth by FDA.
ELECTRODE SELECTION AND CARE
Using Electrodes
Use the electrodes as prescribed. Follow application procedures outlined in
electrode packaging to maintain stimulation and prevent skin irritation. The
electrode packaging provides instructions for care, maintenance, and proper
storage of electrodes.
