aircraft cable
cable stopper
threaded post
5
5.1
Untangle each aircraft cable and insert into the threaded post
until the cable stopper.
5.2
Push on the standoff hub tab and feed the aircraft cable into the
standoff hub until necessary. Release tab to secure in place.
For
the aircraft cable closest to the coaxial cable slide through the
o-rings on the coaxial cable first.
5.3
Remove the clear protective film from the face of the lens.
5.1
6.1
Tighten each threaded post into a cap, one will be on the
backplate and other(s) on the ceiling. If fixture not leveled,
adjustments can be made by pushing on the standoff hub tab.
Then either feed more cable into the standoff hub or pull out
cable from the standoff hub and release to secure.
6.2
Cut off any extra aircraft cable from the standoff hub hole.
6
standoff
hub tab
threaded post
aircraft cable
cap
6.1
6.2
6.2
Teava Suspension
- Installation Instructions
Please read all instructions prior to installation and keep for future reference!
1. Product to be installed by a qualied electrician.
2. Prior to installation ensure power is off at fuse box to prevent electrical shock.
3. More than one person is recommended for this installation.
*LUMINII RESERVES THE RIGHTS TO CHANGE SPECIFICATION & INSTRUCTION WITHOUT NOTICE
Model:
TEA-XX-S
7777 Merrimac Ave
Niles, IL 60714
T 224.333.6033
F 224.757.7557
[email protected]
www.luminii.com
Page 2 of 3
5.2
aircraft cable
threaded post
standoff
hub tab
E472444
REV0.1
7
7.1
If joining fixtures together, insert the fixture end into the corresponding fixture. Secure by tightening the two set screw that is the closest to
the fixture. Reference drawing above as reference, to join correctly.
116.00”-232.00”
joiner @ center in addition to 2 supports
support
fixture
joiner
joiner
7.1
7.1
7.1
fixture
fixture
fixture
set screw
Allen wrench
