Version : 1.0
Date: 15-09-2021
Luminext BV | Schoudermantel 37 | 3981AE Bunnik | Nederland | +31(0)302 072 017 | [email protected] | www.luminext.eu
2
Wiring
The OLC400 Zhaga Wirepas is designed to support the 4 pins connector, Zhaga book 18 LEX-R with the following
interface.
Contact
Assignment
1
+24V power supply
2
Negative pole for DALI protocol
Ground for +24V power supply
Ground for general digital Input signal
3
Positive pole for Dali protocol
4
Digital Input signal
Note Pin 4 is a digital input signal for max 40VDC. It is only available upon request.
Pole Installation
The OLC400 Zhaga Wirepas is designed to fit on top of the luminaire with a Zhaga book 18 LEX-R connector. It will
be very easy installed with the following steps,
1. Remove sealing cap from zhaga receptacle, first twist left and then move up.
2. Connect OLC400 Zhaga Wirepas to the connector and twist to lock in place
Note The OLC400 Zhaga Wirepas must be connected to a dimmable DALI driver, preferred D4I or SR compliant to
function properly.
