Luminex LU 01 00058-POE YZA, Быстрый старт

Страница: 3 / 8

Congratulations, you managed to buy some of the latest high-end technologies in the entertainment industry.
Now let’s rock and roll! Read this quick start guide carefully to get familiar with the basic features of the GigaCore 10.
1. MOUNTING THE DEVICE
GigaCore 10 is a device that can be mounted in a truss as well as in a rack. Please read the following instructions to make sure the device is
mounted and secured correctly.
1.1 RACK MOUNT
In case you want to mount your GigaCore 10 in a standard 19 inch rack, you first have to attach the included mounting ears. Connect the
longest ear (
A
) to the right hand side of the device with 4 out of the 8 screws located on the sides of the product. Attach the shorter ear
(
B
) to the left hand side with the 4 screws that are left. If needed, you can obviously reverse the mounting ears.
1.2 RACK MOUNT - TWO DEVICES
In case you want to mount two GigaCore 10 devices in a standard 19 inch rack, you have the ability to mount the two devices together.
In space saving way that the two devices will only consume a single row in your 19 inch rack.
You first have to attach the included shortest mounting ears. Connect the shortest ear ( ) to the left hand side of the first device with 4 out
of the 8 screws located on the side of the product. Attach the other shortest ear (
D
), delivered with the second device, to the right hand
side with 4 of the 8 screws. Use a pair of couplers (
E
) to connect the two devices in the middle on the frontside. Again use a pair of couplers
(
E
), delivered with the second device, to connect the devices at the rear. Each pair of couplers must be mounted with 2 screws.
WELCOME TO YOUR GIGACORE 10!
(Illustration 1: rack mounting)
A
B
C