9
*Note: The IP address set in DHCP mode is set for backup purpose. If no DHCP server is discovered at
boot-up, the switch will automatically use the assigned IP address.
The front end display offers basic information and configuration of the GigaCore 16RFO, such as network settings, ports
info and groups assignation.
Please find below the flowchart of the menu:
Press & Hold
Press & Hold, turn left
Press & Hold, turn right
Press
<> left & right navigation
Root menu sequence : Device info, Device IP
< Port info >
Exit
< Contrast setting >
Enable / disable backlight
Save
Cancel
Groups
< Group selection >
Cancel / Confirm
Exit
<Port Assignation> >>Ok
Network
<Manual
< >
Cancel / Confirm
<Set IP Address >
<Set Netmask >
DHCP>
Cancel / Confirm
<Set Backup IP Address >
<Set Backup Netmask >
RLinkX
Cancel / Confirm
<Port Assignation> >>Ok
PoE
Cancel / Confirm
<Port Assignation> >>Ok
