READ THESE INSTRUCTIONS
THOROUGHLY BEFORE
INSTALLATION KEEP THESE
INSTRUCTIONS FOR
FUTURE REFERENCE.
IMPORTANT:
This product must be installed
by a qualifi ed electrician or
competent person, and in
accordance with current building
and IET wiring regulations.
• Light Fitting
• Instruction Manual
Fontburn Emergency
2in1 Exit Sign
Surface Mount & Hanging
3W
Technical Helpline: +44 (0)1507 328031
www.lumineux.co.uk
1
2
5
3
6
on
off
4
Fontburn
Emer
gency
1. Push in the two release tabs to separate the
mounting bracket with terminal block from the
gear-tray housing.
(1)
2. Unplug the cable from the gear-tray.
3. Secure the mounting bracket into position, passing
the mains cable through the cable entry.
(2)
4. Connect the cables to the terminal block as shown
in the diagram.
(3)
5. Connect the battery.
(4)
6. Return the gear-tray back into position ensuring
no cables are trapped and the locking tabs
are engaged.
7. To fi t the emergency decal place in position and
use the 2 part plastic rivets to retain into position.
(5)
8. When wall mounting rotate the gear-tray with decal
in one direction only.
(6)
TOOLS REQUIRED
BOX CONTENTS
• Drill
• Screwdriver
• Cable
INSTALLATION INSTRUCTIONS
on
off
This lighting fi xture has been properly
packed to avoid damage during
transit. Before commencing with the
installation carefully inspect the
luminaire to confi rm there is no
damage. DO NOT INSTALL if any
damage has occurred to the fi xture
or any of its components.
• Turn off the mains power before performing
inspections, installation, or removal
• Verify that the supply voltage is correct by
comparing it with the luminaire label information
• It is the installers responsibility to ensure installation
is suitable for the total load of the luminaire(s). The
supply cable, fuses/circuit brakers must be correctly
rated for the electrical load and considering for any
transient inrush currents that may occur
• Do not perform insulation strength or resistance
tests on installed luminarie(s) connected
PLEASE READ THESE INSTRUCTIONS
BEFORE INSTALLATION.
WARNING: Risk of electric shock! Isolate
the mains power before proceeding.
Manby Business Park, Manby, Lincolnshire, LN11 8UT
Lumineux is a B&T Associates Ltd company.
Self-Test
IP20
Warranty
5 YR
Battery
Warranty
2 YR
6000K
L - LIVE (SW)
= Brown
N - NEUTRAL
= Blue
L1 - PERMANENT LIVE
(PL)
= Black
- EARTH
= Green/Yellow
Tab locations
Manby Business Park, Manby, Lincolnshire
R1.0
16072019
NON– EMERGENCY FITTINGS
CLASS I PRODUCT
EARTH CONNECTION
REQUIRED.
LIVE = Brown
NEUTRAL = Blue
GND = Green/Yellow
Product Specification:
Unit
Input Voltage
Wattage Length Width Height LF(mm)
4ft Single 220-240VAC, 50/60Hz
19W
1220
64
62
1016
4ft Twin 220-240VAC, 50/60Hz
38W
1220
64
62
1016
5ft Single 220-240VAC, 50/60Hz
27W
1524
64
62
1320
5ft Twin 220-240VAC, 50/60Hz
50W
1524
64
62
1320
6ft Single 220-240VAC, 50/60Hz
38W
1829
64
62
1625
6ft Twin 220-240VAC, 50/60Hz
60W
1829
64
62
1625
Battery
Rotate 90º
Wall Mount
GG
A
G
