Luminell Norway AS
Doc. Nr.: L0588
–
RLX D User Manual v1.2
Page 3 of 7
3
S
PECIFICATIONS
Voltage Input alternatives 100-277 VAC 50-60Hz 100-300 VDC
Current
240W: 1,05A @ 230 VAC
240W: 10A @ 24 VDC
Power factor AC version
cos
<0.98
Ambient Temperature
-40
°C ≤ Ta ≤ 55°C
IP rating
IP66/67
Weight
14,5 kg
Cable glands
1x M20 Cable glands (6-13mm)
1x M20 and 2xM25 Blind caps
3.1
C
ABLE GLANDS
Make sure to replace unused cable glands with blind caps M20 or M25. Warranty will be voided if replaced
cable glands / blind caps are not UV and weather resistant. In addition, it is the installers responsibility to
ensure that the cable and cable glands are appropriate for each other and properly sealed. For EMC
compliance to MIL-STD461F Navy Mobil & Army, overall screening must be terminated 360° in the cable
gland.
4
M
ECHANICAL INSTALLATION
To attain the long lifetime, please make sure that the heat sink on the back of the chassis has an adequate
passage to allow air to flow freely
–
this for the highest possible cooling performance.
For detailed mechanical drawings see appendix.
The RLX D may be mounted in any direction, however it is recommended to point the cable glands
downwards.
