Luminator Renew System, Руководство по эксплуатации

Страница: 3 / 19

www.luminator.com
Page 3
1 INTRODUCTION
1.1 OVERVIEW
This version of Luminator Technology Group’s Renew™ Air Treatment System is manufactured and designed
for installation and use in transit, rail and vehicle applications.
This guide has basic product information such as mounting information, connections, and startup procedures
for the system – including the Atomizer, Controller and Sensor.
1.2 DISCLAIMER
The information and specifications contained in this guide are subject to change without notice.
1.3 WARRANTY, SERVICE AND SUPPORT INFORMATION
For warranty, service and additional information including technical support, please visit: www.luminator.com
or contact technical support by email: support.na@luminator.com .
1.4 SAFETY NOTES

Do not submerge any components

Always disconnect components from power before manual cleaning

Do not operate the Atomizer if the housing, fluid tank, or cables appear damaged

In the event of a serious operating problem, stop using immediately

The system is designed for use only with Grignard PURE™
o
Grignard PURE should not be diluted - do not add anything to the fluid
o
Do not drink the fluid
o
Avoid direct contact with skin or eyes

Only connect electrical components to a grounded and protected circuit
1.5 SYSTEM COMPONENTS AND ACCESSORIES

Operating and Instruction Manual (this guide)

Renew Atomizer

Renew Controller

Renew Sensor

Atomizer Power Cord

Remote Reservoir

Sensor to Controller Cable

Controller to Atomizer Cable