Luminaire led VPF4 Series Скачать руководство пользователя страница 3

Страница: 3 / 3

INSTALLATION GUIDE FOR

VPF4, VPF8, VPF12 LED SERIES

RETAIN THESE INSTRUCTION FOR FUTURE USE

One Lithonia Way, Conyers GA 30012 | 1.800.705.SERV (7378) |

Page

INSTALLATION PROCEDURE

1. Remove Luminaire from carton and check for damage

2. Remove Lens clamps via 8-32 screws, set aside

3. Remove Lens via 8-32 screw.

4. Remove LED Board Assembly by loosening (2) ¼ hex screws.

5. Unplug the LED Board Assembly from the Driver wires, set aside.

6. Mount fixture to surface using (4) ¼ bolts (not included).

7. Connect all supply wires in accordance with national and local electrical codes.

8. Plug the LED Board Assembly into the Driver wires.

9. Re-install LED Board Assembly using (4) ¼ hex screws. Do not over tighten

10. Re-Install Lens

11. Re-Install Lens Clamps

12. Energize and test.

Housing

End Cap

Lens Clamp

Lens

WARNING

(VPF8, VPF12)

- The main (white LED) circuit and the auxiliary circuit

(Nightlight) are to be wired to separate circuits that can’t be powered on simultaneously.

Содержание VPF4 Series

Страница 1: ...uct must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved WARNING Disconnect power to a...

Страница 2: ...d to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if n...

Страница 3: ...by loosening 2 hex screws 5 Unplug the LED Board Assembly from the Driver wires set aside 6 Mount fixture to surface using 4 bolts not included 7 Connect all supply wires in accordance with national...