Luminaire led LVP1212 LED Series Скачать руководство пользователя страница 3

Страница: 3 / 3

INSTALLATION GUIDE FOR LVP1212 LED SERIES

RETAIN THESE INSTRUCTION FOR FUTURE USE

One Lithonia Way, Conyers GA 30012 | 1.800.705.SERV (7378) |

Page 3 of 3

INSTALLATION INSTRUCTIONS

1. Remove Luminaire from carton and check for damage

2. Remove Lens via 8-32 screws, set aside.

3. Remove LED Board Assembly by loosening (1) ¼” hex screw.

4. Dis-connect the LED Board Assembly from the Driver wires, set aside.

5. Mount housing to surface using (4) ¼” bolts (not included).

6. Connect all supply wires in accordance with national and local electrical codes.

7. Connect Driver wires to LED Board Assembly using supplied wire nuts from Step 4.

Connect black to blue and red to red.

8. Re-install LED Board Assembly using (1) ¼” hex screw. Do not over tighten

9. Re-Install Lens.

10. Energize and test.

Lens

Hex Screw

Screw

Screws

Содержание LVP1212 LED Series

Страница 1: ...ith the construction and operation of the product and the hazards involved WARNING Disconnect power to all circuits before wiring fixture WARNING Install in accordance with all national state and loca...

Страница 2: ...mful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the i...

Страница 3: ...ws set aside 3 Remove LED Board Assembly by loosening 1 hex screw 4 Dis connect the LED Board Assembly from the Driver wires set aside 5 Mount housing to surface using 4 bolts not included 6 Connect a...