After Sales Support
Telephone:
1300 886 649
Email:
After Sales Support
Telephone:
1300 886 649
Email:
7
8
Instructions
→
→
Assembly
Remove all packaging materials from the appliance and dispose of them
responsibly. Plastic wrapping can be a suffocation hazard for babies and young
children, so ensure all packaging materials are out of their reach.
Make sure all parts listed on page 6 are inside the box. If anything is missing,
contact the after sales support line.
Familiarise yourself with the parts and then follow the instructions below.
All parts and connections are named and illustrated on page 6.
• To assemble the charging station, follow the illustrations below:
• To fit the turbo brush, insert it carefully into the bottom end of the main body.
• Position the charging station close to a mains socket, well away from heat
sources and excessive moisture.
• Insert the battery charger jack into the charger socket and connect the
battery charger to the mains power supply.
Charging
• Make sure the vacuum cleaner is switched off before you place it on the
charging station. The charging light will flash to indicate the vacuum cleaner
has made contact with the charging station and is charging.
• It takes 10-12 hours to fully charge the batteries before the first use. When
the device is completely empty, approximately 8-10 hours charging is
required for the battery to regain full capacity. The charging light will flash
while charging and glow steadily once charged.
• In order to ensure that it is always ready for use, we recommend you leave
the appliance on the charger when not in use. The charger may become
warm during charging, this is normal.
Getting Started
Upright vacuuming
The handheld vacuum cleaner fits securely into the main body of the vacuum
cleaner. Before you use the vacuum cleaner in an upright position to vacuum
carpets or floors, make sure the handheld unit is properly fitted into the frame.
• Make sure the unit is sufficiently charged (see page 7).
• Insert the handheld vacuum cleaner securely into the main body until it clicks
into place.
• Start the vacuum cleaner by pushing the On/Off switch on the upper handle
to the On position.
NOTE:
When vacuuming hard floors with the vacuum cleaner in upright
position, check regularly that the brush assembly and rollers are clean in
order to avoid scratching sensitive floors.
Handheld vacuuming
Use the handheld unit for convenient vacuuming of furniture, car seats, stairs or
any areas that are more difficult to access with an upright vacuum cleaner.
• Make sure the unit is sufficiently charged.
• Remove the handheld vacuum cleaner from the main body by pressing
the round release button and lifting the handheld unit out of the main body
frame.
• Start the vacuum cleaner by pushing the On/Off switch on top of the unit to
the On position.
• You may fit the crevice nozzle to the front of the unit to reach into less
accessible places.
