Client:
ALDI AU (OPT)
Project:
KEB 1920F
Language:
AUS
Date:
04.03.2008
Version:
02
Page:
10 (of 12 pages)
Barcode: 930 5026 16 000 9 00343
10
Done: KV
Check: SP
Done: KV
Check: SP
OPErATION GUIDE
Troubleshooting
Should your electric blanket fail to heat, check the following:
Check power connection. The power plug
()
should be inserted
properly in the outlet.
Check that the controller slide switch
(3)
is in position
1
,
2
, or
3
.
CArE AND CLEANING
Do not dry clean your electric blanket. This may damage the
heating element or controllers.
Do not iron, machine wash, or machine dry this blanket.
always turn the power off and remove the plug before cleaning.
Hand washing
Wash the blanket in lukewarm water with a neutral wool detergent
or mild soapy water solution.
Do not immerse controllers, power cord, or plug in any liquid.
Soak for five minutes, remove and gently squeeze the liquid
through the fabric.
Rinse in clean water and then drain excess water from the blanket.
Do not wring.
Spot cleaning
Sponge the affected area with a neutral wool detergent or mild
soap solution mixed with lukewarm water.
Sponge with clean water to remove detergent, and let it completely
dry before using again.
Drying
Drape the blanket over a clothesline to dry.
Do not use pegs on the wired areas.
Do not dry with a hair dryer or heater. allow the blanket to dry
naturally.
Ensure liquid does not enter the controllers; secure them away
from any dripping water.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
