Client:
ALDI Australia
Project:
JU4021
Language: EN
Barcode: 930 5026 10 000 3 00164
7
Date:
23.10.2007
Version:
04
Page:
7 (of 12 pages)
OPeRaTION gUIDe
Preparing for Use
1. make sure your glass or pitcher sits under the spout to
collect the juice.
2. Place the pulp container into the appliance by tilting it
forwards slightly. Insert the top end first and then push
down the bottom end.
3. Place the juice collector into the appliance. make sure
the rim is flush with the motor unit.
NOTe:
While you are preparing juice, you can empty the
pulp container by switching the appliance off and carefully
removing the pulp container. Reassemble the empty pulp
container before you continue juicing.
4. Put the filter in the juice collector. make sure the filter is
fitted securely onto the driving shaft. The blade should
sit below the rim of the pulp container when in place.
5. Hold the lid over the filter and lower it into position.
6. Snap the two clamps onto the lid to lock it into place.
(You will hear a click).
NOTe:
make sure the clamp is locked into position on
both sides of the lid.
7. Slide the pusher into the feeding tube by aligning the
groove in the pusher with the small protrusion on the
inside of the feeding tube.
Directions for Use
8. Knob:
• Off
• Position 1 - Standard Speed (For most fruits &
vegetables)
• Position 2 - High Speed (For hard skin & tough foods)
The juicer will only function if all parts have been properly
assembled and the lid has been properly locked in place with
the clamps.
9. For oversized pieces, wash the fruit and/or vegetables
and cut them into pieces that fit into the feeding tube.
3
2
4
5
6
7
8
9
1
