13 -
S’assurez que l’échelle
et la base soient fermement
appuyées sur le sol. L’échelle
doit avoir une inclinaison
minimale correspondante à une
dimension de 6” entre l’extrémité
13 -
S’assurez que l’échelle
et la base soient fermement
appuyées sur le sol. L’échelle
doit avoir une inclinaison
minimale correspondante à une
dimension de 6” entre l’extrémité
du pied de l’échelle et de la base
(fig. 12).
du pied de l’échelle et de la
base
(fig. 12).
Base
Support Rails
Pivoting
Ladder
Sticker
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Use the cable supplid ti lock the ladder
in an upright position when not in use.
*Not included with the step or ladder.
Call your pool supply for more information.
10 -
Pour sand* (minimum
20 lbs.) into the openings of the
base. Insert the two support rail,
starting at the base to the left and
right ramps. Adjust and center the
support rails and attach with the
eight 10x¾” (8) self tapping
screws (fig. 9).
11 -
Attach the platform to
toprail using straps. Use the holes
which best align the platform
with the toprail ensuring that the
step remains against the pool
wall (fig. 10).
12 -
Attach the pivoting
ladder to the ramps using two
3½” (2) bolts, washers and nuts.
Use the top holes on the ramps
for 48” high pools, the
middleholes for 52” pools, and
the bottom holes for 54” pools
(fig. 11)
Rev. 2007-12-04
p.2
13 -
Ensure the ladder and the base touch
the ground solidly. A minimum ladder angle is
required, which can be mesured as a distance
of 6” between the base and the foot of the
ladder (fig. 12).
NOTE:
Do not overtighten bolts.
CAUTION
:: Install the step on a solid base and flat base.
:: Do not jump or dive from the step.
:: The step should be removed from the water when
temperature drop below freezing.
:: Never lift the step by its rail.
:: Use battery-operated tools to avoid electric shock
near water
:: Ensure no corrosive materials are added to the step
or hardware kit
:: The step and ladder shall be installed per
manufacturer’s instructions.
:: File off all stripped or sharp edges of hardware to
avoid injury and/or pool damage.
:: Step and ladder must be fixed and stable, before
and during utilisation
:: The manufacturer is not responsible for damage
or injuries caused by improper installation or use.
:: For more protection, we suggest to install a step
pad* under the step.
:: For special installations, contac your dealer.
