NOTE:
1: Infrared remote control effective distance >=3m,120
degrees wide Angle.
2: Balance Buttons for better stereophonic effect.
If any one channel has been increased to the maximum, the
other one will be decreased.
5
OWM-6BT
Outdoor
and Indoor
SPEAKER
VOLME
TREBLE
BASS
RESET
PREV
PLAY/PAUSE
NEXT
BALANCE
+
ON
OFF
POWER
+
+
-
-
-
ResetBluetooth Pairing data
(long press for 5s)
Press
Last song
(short press)
Next song
(
press)
short
Bass minus (short press)
Keep minus (long press)
Treble plus (short press)
Keep plus (long press)
Treble minus (short press)
Keep minus (long press)
Volume plus 1(short press)
Keep plus(long press)
Volume minus 1(short press)
Keep minus(long press)
Left Channel Plus(short press)
Keep plus(long press)
Right Channel Plus(short press)
Keep minus(long press)
Bass-
Treble-
Button
Volume-
Balance (Left)
Balance (Right)
Prev
(Bluetooth Input only)
Next
(Bluetooth Input only)
Reset
(Bluetooth Input only)
Bass+
Bass plus (short press)
Keep plus (long press)
Remote Control Function Instructions (for
)
OWM-6A/6BT
Possible Malfunctions and Solutions
Terminal device can’t connect with Bluetooth
The distance between devices is over the maximum distance.
(10 meters generally)
1
2
3
4
1
2
3
No voice when the device is playing
Check if you have touched the “Mute” on the remote control.
The Bluetooth supports only one device connection at a time.
It could be the trouble of terminal itself
.
SOLUTION: Clear the pairing history information on the terminal
device and search the Bluetooth again.
SOLUTION: Enter “0000” and confirmed to connect.
If the aforesaid solutions didn’t solve the problem, try to reset
or restart the device.
The “Volume” rotary knob is in the correct position.
Device failure: Amplifier Protection.
SOLUTION: Check the wires for short circuits.
4
SOLUTIONS: Check whether the previous device has disconnected
or not. You can also judge it through the indicator.
The device hasn’t set a password, but you are asked to enter
password while connecting.
SPECIFICATIONS
Model
OWM-6BT
Frequency Response (±3db) 65Hz-20kHz
Nominal Impedance
8
Ω
RMS Power
/
Tweeter
Woofer
6.5" PP Cone
1" Titanium Dome
Sensitivity
RCA:2VRMS
Bluetooth:Better [email protected]% BER
Amplifier Power
Product Dimensions
Transformer
/
315x222x235
(12.4"x8.7"x9.3")
mm
2x30W/8Ω
Function Instructions (for
)
OWM-6A/6BT
LED Indicator
Blue Flash:
Bluetooth pairing
Steady Blue:
Bluetooth connected
Steady Green:
Wireless Mic connected
Steady Orange:
RCA connected
Steady Red:
Standby mode
Red Flash:
Amplifier Error
1
2
3
4
Turn your device’s Bluetooth function ON and select “BT
Speaker”.
It needs some time for the first time connecting.
Once paired successfully, the LED indicator will become Steady
Blue.
NOTE: OWM-6A can’t pair with 2 devices in the same time.
Audio Input Option
·
Bluetooth Input (OWM-6BT only)
·
RCA Input (Both OWM-6A and OWM-6BT)
·
Wireless Mic Input (additional option)
Bluetooth Input has the priority if both Inputs are connecting:
·
The speaker will stay on Bluetooth Pairing mode after power
on for 10s.
·
Only if the Bluetooth device stops playing over 8s and a RCA
Input is found, the speaker will switch to RCA Input. (The
Wireless Mic can be used with RCA/Bluetooth simultaneously.)
Bluetooth Connecting Process:
Power the speaker and the LED indicator will flash Blue. That
means it’s available for Bluetooth pairing.
