16
Operation manual RA-915M
В0100-00-00-00-00 OM
Use the
and
navigation buttons to set the required value
and press the
Ent
button;
When the required values of all parameters are set, press
the
Esc
button. The
Save parameters
dialog will be dis-
played over the
Parameters menu
window (Fig. 2-5). Three
options are available:
Save
– to save all changes,
Cancel
–
to reject all changes,
Default
– to restore default parame-
ters.
Fig. 2-5
– Save parameters dialog
To execute the required command, select it with the
and
buttons
and press the
Ent
button. The desired action will be carried out and the
Settings Menu
window
(Fig. 2-3) will appear.
2.1.5
Checking Analyzer Serviceability
To check the analyzer serviceability, select the
Test
mode in the
Main menu
(Fig. 2-2) by using the
and
navigation buttons and press
the
Ent
button.
Upon pressing the
Ent
button, the Analyzer starts self-testing accord-
ing to the standard algorithm. After about 30 s the
D
value will appear in
the left bottom corner of the display (Fig. 2-6).
