English -
28
5. Press [PLAYBACK] to return to image thumbnails.
6. Repeat Steps 2 ~ 4.
7. Press [MENU] to exit.
8.18
I would like to resume the factory default setting
(Factory Reset)
8.18.1 Use the OSD menu
1. Press [MENU] on the
remote control
or
control panel
to enter the
setting menu.
2. Press [
] or [
] to the [Advanced] menu.
3. Press [
] to the [Factory Reset].
4. Press [
] or [
] to select [Yes].
5. Press [ENTER] to activate.
8.18.2 Use Compound Key
1. Use the
remote control
or
control panel
, and press
[Enter + Auto
Tune]
simultaneously to restore the initial value.
8.19
I would like to reduce the image noise (Projector
Type)
1. This function enables Document Camera to automatically clear image
noise. The noise is especially obvious when Document Camera is
connected to a DLP projector. You can set the DLP projector to
improve the image quality.
2. If there is special noise when VGA out is connected, please set DLP
option to improve the image quality.
3. Press [MENU] on the
remote control
or
control panel
to enter the
setting menu.
4. Press [
] or [
] to the [Setting] menu.
5. Press [
] to enter [Projector Type].
6. Press [
] or [
] to select
[LCD/DLP]
.
7. Press [MENU] to exit.