English
-
34
7.21
I would like to resume the factory default setting
(Factory Reset)
1. Press [MENU] on the
remote control
or
control panel
to activate
the setting menu.
2. Press
[
], [
], [
], or [
] to select [Setting].
3. Press [ENTER] to activate.
4. Press
[
] or [
] to select [Advanced] menu.
5. Press
[
] to select [Factory Reset].
6. Press
[
] or [
] to select [Yes].
7. Press [ENTER] Execute
。
7.22
I would like to change the power on image
<Note> The power on image file must be less than 5 MB and in JPEG
format.
<Note> To save the file, please follow the instruction below:
File path: \DCIM\100MEDIA, for example: J: \DCIM\100MEDIA
File name: four English four numbers, for example: LUMN0001.JPG
1. Press [MENU] on the remote control or control panel to activate the
setting menu.
2. Press
[
], [
], [
], or [
] to select [Setting].
3. Press [ENTER] to activate.
4. Press
[
] or [
] to select [Advanced] menu.
5. Press
[
] to select [Splash Screen Settings].
6. Press [ENTER] to activate.
7. Press
[
] or [
] to select [Power On Image Setting] and press [
] or
[
] to select [Default/Custom].
8. Press
[
] or [
] to select [Power On Logo Show time] and press [
]
or [
] to set up the time.
9. Skip to Step 11 if your select [Default] in Step 7
10. Press [
] or [
] to [Power On Image Select] and press [ENTER] to
read selected file.
11.
按
[
] to [Exit] and press [ENTER] to exit.
7.23
Computer-related functions
Ensure that the USB cable is connected and the drivers are installed
before using the computer-related functions. Refer to
Chapter 4
