Lumens LE-T32, Руководство пользователя, Страница: 12 / 14

LE-T32 User Manual Lumens
12
Major Items Item Value/Selection Description
System -
Information
Active NA
Display the source information on the video played
Laser NA
Display laser use duration
Color Wheel NA
Color wheel use life
Engine NA
Light Engine use life
Cube
Temperature
NA
Body temperature, two digits for ENV Temp
CU FW Ver. NA
Firmware version of Control unit
Engine FW Ver. NA
Engine Firmware Version
DLP FW Ver. NA
DLP Firmware Version
System - Host
iSystem Balance NA
Trigger iSystem Balance
iSystem Mode
Off
1.
Auto option checks the change of each engine’s
brightness every 10 minutes; when the change is more
than 5%, it runs the brightness balance function
(iSystem Balance must be performed previously)
2. When
Intelligent mode is set to Auto/Manual ,
Projector mode can only be set to Normal or
Economic mode . However, Brightness cannot be
selected
Manual
Auto
Screen lock
This option only display after entering 5544465 in the
Host CU
Screen lock
Off
When the time is up, the screen will be locked as no
picture; enter password to unlock On
Time 1 ~ 9999
Unit: hour(s)
When the Screen Lock is enabled, it can’t be set
Change Password NA
Change password
Online Cube List NA
Display status of connected Cube
Brightness: Display brightness differences between
connected Cube
Target: Enable target values of iSystem function
Advance - Misc
IndexDly/
Phosphor
IndexDly
0~719
Error Message
Off 1. Enable or disable error messages of fan and lamp
MSG
2. If both fan and lamp failed then display the whole
row concurrently
3. After other OSD screens disappear, the PROMPT
displays until timeout
4. If the situation persists the display time of PROMPT
will be re-defined
5. The ON status of LAMP will timeout in 10 minutes
On