English
-
12
¾
Set up the remote learning: Click
[IR]
1. Take the remote and point it at the IR receiver
2. Click
[OFF]
on the screen, and press down [Power Off] on the
remote when the text prompts.
3. Click
[ON]
on the screen, and press down [Power ON] on the
remote when the text prompts.
<Note> If the button on the remote is not pressed down or released
within the limited time when the text prompts, the prompt window
of learning failure will pop-up.
¾
To change the IR sending settings, please click
[IR Setting]
1. Select the button to be set up
2. Set up the key press times
3. Set up the key press time
4. Set up the time delay
5. Click
[OK]
<Note> The key press times and the time delay are only applicable
to the setting of Power off
X
Y
Z
[
\