English -
38
8 Press [MENU] to exit the Ethernet OSD menu.
9 Repeat steps 3 ~ 4 and check IP address.
12.
The output image is
not clear with water
ripples
Please refer to the
Appendix 1
in the manual to confirm the
applicable power frequency, and reset it according to the
instruction in
5.2 Setting Menu
.
13.
The live image does
not display after you
login to the website
1. Please install the
ActiveX
control
according to the
instruction on the screen
2. If the instruction for installing the
ActiveX
control
does
not appear,
please follow the following steps to confirm
and remove the old version of
ActiveX
control
components, and then re-install the
ActiveX
control
components.
2.1.
Remove the components (Browser IE 8.0/IE
9.0):
Open the IE browser, activate [Tool]
→
[Manage
Add-ons]
→
in the drop-down menu of [Display]
at the left side, select [All add-ons]. Then, after
selecting “GFFMpeg Class” and “GoDB Class”,
right-click the mouse to open the menu, and click
[More Info (R)]. Click the [Remove] button at the
bottom left, and then press the [Close] button at
the bottom right to complete the removal of
components.
2.2.
Remove the components (Browser IE 7.0):
Open the IE browser, activate [Tool]
→
[Manage
Add-ons]
→
[Enable/Disable Add-ons]
→
in the
drop-down menu of [Display], select [Add-ons that
have been used by Internet Explorer]. Then, after
selecting “GFFMpeg Class” and “GoDB Class”,
press the [Delete] button at the lower right corner.
2.3.
After reloading the website, please follow the
instruction on the screen.