Lumenlab eVo v1.1, Руководство пользователя, Страница: 18 / 28

18
Replacing the lamp
After your lamp has been operating for 6000~9000 hours, the brightness will
become weak and the image quality will deteriorate.
At this point you should replace the lamp to maintain optimal performance.
Figure 1.1 Figure 1.2 Figure 1.3
Note: Do not touch the lamp immediately after it has been used. It will be
extremely hot. Turn the projector off, turn off the main power switch and
then disconnect the power cable. Allow at least one hour for the lamp to
cool before handling.
To replace the lamp:
1. Place the projector on a soft cloth and turn it upside down. Use a
Philips head screwdriver to release the screw securing the lamp cover.
(See figure1.1)
Push up and remove the lamp cover. (See figures 1.2 and 1.3)
Replacing the lamp