background image

Lumencor: 

Light Engine Control Pod

 

54-10036

 

www.lumencor.com 

Light Engine Control Pod

Set Up and Operating Instructions

Set Up

1.  Connect the USB A port of the light engine control pod accessory to the serial port of the light engine according to the table below.

Light Engine

Light Engine Serial Port

Cable

AURA

RS-232 or USB B

RS-232 to USB A (29-10011) or USB A to USB B (29-10058)

LIDA

USB A

USB A to USB A (29-10057)

MIRA

USB A

USB A to USB A (29-10057)

SOLA SE

USB A or USB B*

USB A to USB A (29-10057) or USB A to USB B (29-10058)

SPECTRA/SPECTRA X

RS-232

RS-232 to USB A (29-10011)

*SOLA SE light engines shipped before November 2014 have USB A. SOLA SE light engines shipped after November 2014 have USB B.

2. For stand-alone operation with SPECTRA X, SPECTRA and AURA light engines with RS-232 serial ports, connect a DC power supply (5V/500mA) to

the USB B port of the pod [1].

3.  Alternatively, if pass-through control from a host computer is required, connect the USB B port of the control pod to a USB A port on the host computer.

4.  Press and hold the 

RIGHT

 button on the pod until the light engine selection display appears. Turn the rotary dial to move the cursor and select the light

engine model connected to the pod. Press the 

RIGHT

 button again to return to the main display screen.

5.  The assignment of light engine color channels can be adjusted [2]. Press and hold the 

LEFT

 button for 5 seconds until the color assign display appears. 

Select the desired channel by cycling through the available channels by successive presses of the 

LEFT

 button. Select the desired color assignment

from the list on the right of the screen by advancing the cursor using the rotary dial. Press, hold and release the 

RIGHT

 button to con

fi

 rm the selection. To 

return to the main display, turn the rotary dial clockwise until an “Exit” icon appears in the bottom left corner of the screen, then press the 

RIGHT

 button.

Notes

[1] Light engines with USB serial ports supply power for the pod via the USB connection.
[2] AURA, SPECTRA and SPECTRA X light engines only.

FIGURE A: 

Light Engine Control Pod showing 

the main (0-100 analog intensity) display, 

LEFT

 

and 

RIGHT

 push buttons and rotary dial controls

FIGURE D: 

USB connectors on 

rear of the light engine control pod

FIGURE B: 

Light Engine 

selection display

FIGURE C: 

Color assign display

Отзывы: