3
ENG
and other liquids placed on the lighting can leak, which can cause damage to the anodized surface,
and thus degrade the level of heat release and the aesthetics of the led lighting system it’self. Due to
the heat, plant fertilizers and fish food deteriorating faster.
●
Body of led lighting system is heated during use. The operating temperature must not 70 ºC.
●
Do not use the led lighting system if the light source is defective or damaged
●
If any part of the led lighting system comes into contact with water, immediately disconnect it from the
power supply and remove the water, only after you have made sure that all the water / moisture has
been removed you can connect the led lighting system to the power supply again!
●
Make sure the led lighting system works as intended. In case of an error please do not experiment, do
not hesitate to contact us.
●
Make sure the power sources and connections are properly connected and installed. The installation
of connections and power sources should be planned so that they are not accessible to children and
pets.
●
Do not leave a child unattended beside the led lighting system!
●
In moment of purchasing of our led lighting system, please check the condition of the led lighting
system. If you find that there is any damage to the led lighting system it’self, please notify the store
where you purchased the led lighting system immediately. Do not use faulty led lighting systems.
The use of led lighting system is not allowed in extreme conditions.
Under such conditions are considered:
●
water source directed directly at the lighting (dripping or spraying),
●
too high humidity (> 95%),
●
too high ambient temperature (> + 40 ° C),
●
the presence of large amounts of dust and flammable gases and vapors and solvents
Such or similar circumstances mentioned above are not allowed as they may result in malfunction of the
lighting it’self.
In addition, there is a risk of short circuit failure, electric shock, fire, etc.
We do not accept any responsibility for material or personal injuries due to improper handling or non-
compliance with safety regulations. Modifications and / or any repairs to the device by the end user or third
parties are strictly prohibited for safety reasons and for licensing (CE). If you have any doubts about
installation, operation, safety, etc. led lighting system it’self, we kindly ask you to contact us, we will always
be happy to help you.
Statement of responsibility:
The manufacturer reserves the right to change this document. The
manufacturer accepts no liability in the event of incorrect use of the device!
