Grandstream DP750/720 Series
Quick Reference Guide
page 3 of 4
Services not available everywhere. Business customers only. Lumen may change, cancel or substitute products and services,
or vary them by service area at its sole discretion without notice. ©2020 Lumen Technologies. All Rights Reserved.
Feature overview
—continued
Transfer (blind/unsupervised)
Transfer (consultative/supervised)
Blind-unsupervised transfer does not allow you to announce the call:
Blind transfer:
1.
While on an active call, press the
Options
soft key.
2.
With
Transfer
highlighted, press the
Select
soft key.
3.
Enter a
10-digit number
or
extension
to transfer to.
4.
Press the
Transfer
soft key.
You’re dropped from the call and the transfer completes with no
opportunity to announce the caller.
Consultative transfer allows you to announce the call before
completing the transfer:
Consultative transfer:
1.
While on an active call, press the
Options
soft key.
2.
Navigate down to
New Call
and press the
Select
soft key.
3.
Enter a
10-digit number
or
extension
to transfer to and press
the
Send
soft key.
4.
When the party answers, announce the transfer.
5.
Press the
Options
soft key.
6.
With
Transfer
highlighted, press the
Select
soft key.
7.
You’re dropped from the call after announcing the transfer,
completing the transfer.
Cancel consultative transfer:
1.
If the party chooses not to accept the transfer, press the
Red
handset
button to disconnect that call.
2.
Press the
Resume
soft key to return to your caller.
Call forwarding
Do not disturb (DND)
Enabling and disabling call forward always must be accomplished
using FAC’s (feature access codes). You cannot use the forwarding
option under
Menu
>
Call Settings
>
Forward
:
To enable forwarding:
1.
On the keypad, enter
*72+10-digit number
or
extension
you
want to forward to.
2.
Press the
Green handset
button or the
Speakerphone
button to
send the call.
3.
Receive an audible that your call forwarding service has been
activated successfully.
To disable forwarding:
1.
On the keypad, enter
*73
.
2.
Press the
Green handset
button or the
Speakerphone
button to
send the call.
3.
Receive an audible that your call forwarding always service has
been deactivated successfully.
From the handset, place any line appearing on the device in DND
mode; incoming calls roll to voicemail when with DND enabled:
To enable DND:
1.
Press the
Menu
soft key.
2.
Navigate down to
Call Settings
, then press the
Select
soft key.
3.
With
Do Not Disturb
highlighted, press the
Select
soft key.
4.
With the correct
Line
highlighted, press the
Select
soft key.
5.
Navigate up to highlight
Enabled
, press the
Save
soft key.
To disable DND:
1.
Press the
Menu
soft key.
2.
Navigate down to
Call Settings
, then press the
Select
soft key.
3.
With
Do Not Disturb
highlighted, press the
Select
soft key.
4.
With the correct
Line
highlighted, press the
Select
soft key.
5.
Navigate down to highlight
Disabled
, press the
Save
soft key.
Contact
—add new contacts
Contacts
—dialing from
Manually add private or shared contacts. Private contacts appear
within contacts on your handset only, shared contacts appear within
contacts on every handset paired to the same base unit:
To add a new contact:
1.
Press the
Menu
soft key.
2.
With
Contacts
highlighted, press the
Select
soft key.
3.
Use the up/down navigation key to select
Private
or
Shared
, then
press the
Select
soft key.
4.
Press the
Options
soft key.
5.
Navigate down to highlight
New Contact
, press the
Select
soft
key.
6.
Using the letters on the keypad, enter a
First Name
,
Last Name
for your contact
7.
Enter at least one number in the
Home
,
Work
or
Mobile
fields
(only one number is required, but if numbers are added to each
field, each number can be dialed for that contact).
8.
Use the left/right navigation keys to assign a unique
Melody
for
that contact.
9.
Press the
Save
soft key.
Numbers can be dialed for contacts saved to either the private or
shared contacts list:
To dial from a contracts list:
1.
Press the
Menu
soft key.
2.
With
Contacts
highlighted, press the
Select
soft key.
3.
Use the up/down navigation key to select
Private
or
Shared
,
then press the
Select
soft key.
4.
Use the up/down navigation keys to locate your contact, .and
press the
Options
soft key.
5.
Navigate down to
Edit Dial
, and press the
Select
soft key.
6.
With the number displayed, click the
Call
soft key to place a call
to that individual.
