LUMEN FOCUS FFR 1X8 KIT INSTALL INSTRUCTIONS
WARNING - RISK OF FIRE OR ELECTRIC SHOCK.
INSTALL THIS KIT ONLY IN LUMINAIRES THAT HAVE
THE CONSTRUCTION FEATURES AND / OR DRAWINGS
AND WHERE THE IMPUT RATING OF THE REROFIT KIT
DOES NOT EXCEED THE INPUT RATING OF THE LUMINAIRE.
WARNING - TO PREVENT WIRING DAMAGE OR ABRASION,
DO NOT EXPOSE WIRING TO EDGES OF SHEET METAL OR
OTHER SHARP OBJECTS.
WARNING - RISK OF FIRE OR ELECTRIC SHOCK, LUMINAIRE
WIRING AND ELECTRICAL PARTS MAY BE DAMAGED WHEN
DRILLING FOR INSTALLATION OF LED RETROFIT KIT.
CHECK FOR ENCLOSED WIRING AND COMPONENTS.
CAUTION: UNLESS OTHERWISE INDICATED, DO NOT
MAKE OR ALTER ANY OPENINGS IN THE COMPARTMENT
OF WIRING OR ELECTRICAL DURING INSTALLATION OF THIS
RETROFIT ASSEMBLY. PLUG ALL UNUSED OPENINGS IN THE
COMPARTMENT OF WIRING OR ELECTRICAL COMPONENTS.
WARNING - RISK OF FIRE, ELECTRIC SHOCK, OR PERSONAL
INJURY. BEFORE INSTALLATION TURN POWER OFF.
WARNING - RISK OF FIRE OR ELECTRIC SHOCK, LED RETROFIT
KIT INSTALLATION REQUIRES KNOWLEDGE OF LUMINAIRES
ELECTRICAL SYSTEMS. IF NOT QUALIFIED DO NOT ATTEMPT
INSTALLATION. CONTACT A QULIFIED ELECTRICIAN.
CAUTION: THE INSTALLATION AND SERVICING OF THIS PRODUCT SHOULD BE PREFORMED BY A QUALIFIED ELECTRICIAN OR SERVICE PERSONNEL
KIT INCLUDES
QTY. PART NUMBER.
1 FFR ENDCAP RIGHT HAND
1 FFR LED PANEL NO DRIVER
2 FFR BLANK PANEL
4 QUARTER TURNS
1 FFR ENDCAP LEFT HAND
2 SAFETY STRAPS
2 SELF-TAPPING SCREWS
2 TEK-SCREWS
1 LENS
1 873-902 DISCONNECT
DETAIL A
SQUARE CUT OUT ON
LED PANEL
FORM TAB ON
FFREC LH & RH
DIMPLE ON FORM TAB
ROUND HOLE IN LED PANEL
SLIDE LED PANEL
1. PLACE FFR ENDCAP ITEM A1 & A2 AT EACH END & CENTER MOUNT
7. SLIDE BLANK PANEL AT EACH END BETWEEN GRID AND TROFFER
FASTEN WITH PROVIDED QUARTER TURNS ITEM F 4X
ITEM
A1
A2
B
DIMPLE ON FORM TAB WILL SNAP IN THE HOLE OF THE ITEM B SEE DETAIL A
ITEM E
F
G
H1
H2
J
K
ITEM F
ITEM F
ITEM K
PAGE 2 OF 3
SEE PAGE #3
INSTALL ITEM C
WITH DRIVER
3. SLIDE LED PANEL BETWEEN GRID AND TROFFER FASTEN USING SQ CUT OUT
ON LED PANNEL AND FORM TAB ON ENDCAP OR CENTERMOUNT SEE DETAIL A
4. CONNECT LED PANEL LEDS TOGETHER ELECTRICAL WITH PROVIDED DISCONNECT SEE FIG 04
5. CONNECT LED PANEL ELECTRICAL WITH PROVIDED DISCONNECT SEE FIG 05
WHITE(NEUTRAL) TO WHITE, BLACK(POWER FEED) TO BLACK
CONNECT GREEN GROUND TO FIXTURE BACK WITH PROVIDED SCREW
CONNECT OTHER END OF SAFETY-STRAP TO FIXTURE USING TEK-SCREW
ALL SCREWS ARE PROVIDED IN KIT.
6. INSTALL SAFETY-STRAP AT EACH END OF FIXTURE
1 SELF-TAPPING SCREW USED TO ATTACH STRAP TO ENDCAP
1 FFR LED PANEL WITH DRIVER
C
1 FFR CENTER MOUNT
D
E
ITEM E
ITEM B
ITEM C
ITEM F
ITEM F
INSTALL ITEM B (NO DRIVER) ON THE NON-ELECTRICAL END OF THE FIXTURE
2. SLIDE LED PANEL ITEM B BETWEEN GRID AND TROFFER FASTEN USING SQ CUT OUT SEE FIG 03
ON LED PANNEL AND FORMED TAB ON ENDCAP OR CENTERMOUNT SEE DETAL A
HIGH VOLTAGE DISCONNECT
LOW POWER DISCONNECT
DETAIL A
DETAIL B
INSTALL ITEM F 4X
SEE DETAIL B
PICTURE OF ENDCAP INSTALL SEE FIG 02
PICTURE OF DETAIL B
CL
INSTALL FFREC'S BY
SLIDING IN BETWEEN
TROFFER AND GRID
CL
INSTALL LUMINAIRE
MODIFICATION LABEL
PROVIDED IN KIT
CL
A1
A2
INSTALLING ITEM A1, A2, AND CENTER MOUNT
IN THE CENTER OF THE FIXTURE
BY SLIDING IN BETWEEN TROFFER AND GRID (SEE FIG 01)
SLIDE END CAP A1 & A2 AT EACH END OF THE FIXTURE
INSTALL ITEM C ON THE ELECTRICAL END OF THE FIXTURE
AND SLIDE CENTERMOUNT TO CENTER OF THE FIXTURE (SEE FIG 02)
FIG 01
INSTALL SAFETY-STRAPS SEE FIG 06
FIG 02
INSTALL ITEM B
WITH NO DRIVER
FIG 03
DIMPLE ON FORM TAB WILL SNAP IN THE HOLE OF THE ITEM C SEE DETAIL A
INSTALL ITEM B WITH NO DRIVER FIRST
FIG 05
FIG 04
USE SELF-TAPPING SCREW
TO INSTALL TO END CAP
PROVIDED IN KIT ITEM H1 2X
USE TEK-SCREW
TO INSTALL IN
THE FIXTURE
PROVIDED IN KIT ITEM H2 2X
VIEW OF KIT WITH SAFETY CABLES INSTALLED
ITEM G
ITEM G
FIG 06
INSTALL ITEM E 2X SEE FIG 07
SEE DETAIL A
SEE DETAIL A
SEE DETAIL A
FIG 07
INSTALL INSTRUCTION FOR FFR 1 X 8 RETRO KIT
